Dpi C607 Sp/A,Panoramic Vision Positive Pressure Full Face Mask W/Speech Diaphragm & Filter Connector To En148/3 (M45X3)

DPI C607 SP/A,PANORAMIC VISION POSITIVE PRESSURE FULL FACE MASK 

Full face mask with a wide field of vision. One size fits all. Complies with EN 136 (for positive pressure versions complying
with EN 148/3 and for use with filter with thread EN 148/1). A silicone rubber version is also available for better comfort and
easier decontamination. For use with dust, gas and combined filters (with a threaded connector conforming to EN 148/1) and
with air supply devices (with a threaded connector conforming to EN 148/3).

MAIN FEATURES

• Materials used are not likely to cause allergies or irritations to the
  wearer’s skin.
• Good adaptability to most faces.
• Leakage less than 0,05% corresponding to a protection factor of over 2000.
• Wide field of vision, in excess of 72% of the natural field of vision
  and beyond 93% of the overlapped field of vision.
• Excellent demisting system.
• Breathing resistance (1,8 mbar during inhalation and 2,0 mbar during exhalation at a flow rate of 160 l/min) well below standard approval maximum limits.
• Reduced dead space (less than 50% of maximum allowed).
• Excellent voice transmission thanks to the frontal position of the speech diaphragm, which allows utilization of a telephone, walkytalky and public address device.
• Good flame and radiant heat resistance: the mask is self extinguishing and maintains full protective capacity even after very severe test (approved according to DIN 58646/10).
• Standard visor made of high impact resistance polycarbonate resistant to acids, even at high concentrations.
• Optional: multilayer safety glass visor especially
• resistant to paints and solvents.
• Quick and easy to don and doff.
• Long storage durability, high resistance to ozone.
• Easy to maintain, clean and sanitize. All components can be disassembled without special tools.
• Compatible with the use of safety helmets.
• Weight: approx. 580 g.

The C607 can be fitted with the following Sèkur filters:

• Series 230 (with screw in adaptor EN 148/1);
• Series DIRIN 230;
• Series DIRIN 300;
• Series DIRIN 500;
• Filter DIRIN 530

MAIN COMPONENTS

• Synthetic rubber face piece with wide internal seal for a tight fit and
  adjustable fasteners for the attachment of the harness (patented).
• Wide field of vision and distorsion free visor made of polycarbonate, with fiberglass reinforced synthetic resin frame, easily replaceable.
• Inner mask with non return valves.
• Threaded connector conforming with European EN 148/1 standard, with speech diaphragm.
• Two exhalation valves with compensating prechambers.
• Five straps elastic harness made of rubber, with quick release buckles.

About DPI SRL

D.P.I. srl, an Italian company that specialises in Full Face Masks, Half Masks, Filters, Self Contained Breathing Apparatuses (SCBA), EEBD and Escape Sets, Mandil Disposable Filtering Facepieces.